PocSagDecoding

Make sure you have a Raspberry Pi up- and running and install the lastest updates:

Github instruction: https://gist.github.com/floehopper/99a0c8931f9d779b0998

Link to Osmocom RTL-SDR Project : https://osmocom.org/projects/rtl-sdr/wiki/Rtl-sdr

  sudo apt-get update 
  sudo apt-get upgrade

  sudo apt-get install rtl-sdr
  sudo apt-get install libusb-1.0-0-dev git cmake
  git clone https://gitea.osmocom.org/sdr/rtl-sdr.git
  cd rtl-sdr

---

  673  mkdir build
  674  cd build
  675  cmake ../ -DINSTALL_UDEV_RULES=ON
  676  make
  677  sudo make install
  678  sudo cp ../rtl-sdr.rules /etc/udev/rules.d/
  679  sudo ldconfig
  680  echo 'blacklist dvb_usb_rtl28xxu' | sudo tee – append /etc/modprobe.d/blacklist-dvb_usb_rtl28xxu.conf
  682  sudo reboot now

• PocSag: POCSAG N3

Multimon-NG

• Multimon-ng Github Elias Oenal https://github.com/EliasOenal/multimon-ng
• Multimon-ng Info Kali.org https://www.kali.org/tools/multimon-ng/
• Multimon-ng Info KB9MWR https://www.qsl.net/kb9mwr/projects/pager/multimon-ng.html